Sunday 9th January 2022

 Vertical system 

A 6 feet tower length was measured and the net pockets were made using a heat gun and glass bottle. first the pipe was measured 6" on both ends then 12" apart for each pocket.  Total of 21 pockets 

A "X" was marked to indicate each point then a line was drawn so a small cut could be made. using a grinder the line was sliced. where the line was sliced, heat was applied using the heat gun. once the PVC was soft then a glass bottle was inserted to create the pocket and water was used to cool the PVC.

 












Comments

Popular posts from this blog

Monday 04th October, 2021

Assessment

Thursday 23rd September, 2021 -Introduction