Thursday 6th January, 2022

 Test for getting the correct cut size was done starting with 1.5 inch to 2-inches. the 2- inch cut was perfect fit for the net up I bought. 

I measured 6" from the both end of the pipe then a 2-inch hole was drilled, each net cup was 8" apart with a total of 6 holes in one grow tower.  all five where marked and drilled. 

Total number of net pocket= 30 so 30 plants could fit however the extra holes were put to let air enter the system without using an air pump. 

The stand was then laid out to show the sketches I drew. The chop saw was used to cut the 3/4 pipe into small lengths 

Quantity    Length 

17                4.5"

2                  10.125"

2                  16.25"

2                   22.125"

9                   4.125"

2                   30"